Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Engine installed and blowing a little smoke
From:Stuart MacMillan
Date:Tue, 25 Jun 2013 08:41:07 -0700

Time for a leak down test along with a compression test.  You probably won't
like what you find.  HFs tester works just fine:
http://www.harborfreight.com/catalogsearch/result?q=leak+down+tester  Best
bad news generator I own!

Stuart

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Robert Anderson
Sent: Tuesday, June 25, 2013 4:42 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Engine installed and blowing a little smoke

Hello All,
After a winter project of replacing the head gaskets in my 2.1 engine, I now
have the engine back in and just started it up and she sounds good, however
she is blowing a little smoke when I rev up the gas. Prior to my doing the
head gaskets this engine sat out for about a year. I'm wondering if a little
smoking is normal and should clear up after running for a while?
Thanks,
Bob Anderson
Wilmington, MA

Sent from my iPad=