

| Subject: | Re: engine bucking and bogging - simple answer |
| From: | Stuart MacMillan |
| Date: | Mon, 15 Jul 2013 19:52:37 -0700 |
Many years ago in a different life and on a different planet I experienced this in my MGB. In total exasperation, I finally pulled the tank, and found that someone had siphoned off gas using rubber surgical tubing and just stuffed it into the tank when they were done. It mostly dissolved, but there were clumps of gel that would clog the pick-up, especially after long drives. You may well have crud in your gas tank from who knows where, but try everything else before you get a new tank. Adding alcohols, especially ethanol if you can get 100% denatured, will suspend any water, but still leave the crud behind. Stuart -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Alistair Bell Sent: Monday, July 15, 2013 6:02 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: engine bucking and bogging - simple answer I will. But the timing and the cure of the problem makes me think bad gas. One would think that if it was a wiring issue it would occur more frequently, and in winter too. Winter here means rain, lots of rain. Temp 2 sensor in a bit of an exposed to road splash area. But I will check the connection and wires. thanks alistair On 2013-07-15, at 5:49 PM, Dennis Haynes wrote: > Check the wiring/connections to the temp 2 sensor next. > > Dennis, > From my phone.
Have something to add on this topic today? Revive this thread in the forum »