Ground to the body near the lights. Run the power wire to the left side
behind the left headlight bucket and sneak in with one of the harnesses
under the grommet to get the wire inside. Use a switch and relay, wire up so
fogs only operate with low beams. Consider current capacity all the way from
the alternator, not just the battery.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Jim Felder
Sent: Tuesday, July 16, 2013 7:27 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Best way from bumper mounted lights to under dash?

My next step in installing bumper mounted fog lights is to get them grounded
and get wiring into the under-dash area.

Who has done this who has found a good way to do it?

Thanks,

Jim