You have to call them. They will sell to you over the phone.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Edward Maglott
Sent: Friday, July 26, 2013 8:44 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: exhaust leak, header tubes to collector on 2.1 engine-Exhaust
sealants

Dennis,
Where can an average Joe buy this in the 4oz can?
Edward

At 11:18 PM 7/24/2013, Dennis Haynes wrote:
>http://www.jrdindustries.com/id68.html
>
>I have recently discovered the JRD 7100, get the 4oz. can. This will
>seal those exhaust flanges. Silicones and other types of sealants
>should never be used on the exhaust unless the goal is an O2 sensor or
Catalyst replacement.
>Exhaust temps can get into that 1300f range (the pipes glowing red). If
>you must use a sealant you need something to put up the fight.
>
>
>Dennis
>
>
>-----Original Message-----
>From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
>Of Stephen Grisanti
>Sent: Wednesday, July 24, 2013 3:00 PM
>To: vanagon@GERRY.VANAGON.COM
>Subject: Re: exhaust leak, header tubes to collector on 2.1 engine
>
>Same thing happened to me with an exhaust system from a different vendor.
>Did not look quite lined up and leaked when I fired it up, so relied on
>the extra gaskets and spray copper stuff to seal it up.  I would have
>much rather had a set that lined up perfectly but needed the van ready
>for an upcoming vacation already planned.  Sometimes you just have to make
do.
>
>Stephen
>
>
>________________________________
>  From: David Beierl <dbeierl@ATTGLOBAL.NET>
>To: vanagon@GERRY.VANAGON.COM
>Sent: Wednesday, July 24, 2013 11:52 AM
>Subject: Re: exhaust leak, header tubes to collector on 2.1 engine
>
>
>At 11:26 AM 7/24/2013, OlRivrRat wrote:
> >        Why didn't you return them?
>
>By the time you get underneath and are trying to fit them up you tend
>to have an awful lot invested in the status quo...my experience anyway.
>
>I got some 1.9l exhaust stuff from Bus Depot many years ago that needed
>surgery.  Come to think of it I rather believe it was Dansk.  It was a
>rush order, I was headed to Nova Scotia the next day, and I spent the
>night doing whatever it was.  I wasn't extra happy, and after the trip
>I asked to swap them for proper ones.  Ron wasn't particularly
>receptive, and I understood -- he couldn't really give them back to
>Dansk after I'd hacked on them.  In a better world etc, but this is the
>world we have.  It certainly wouldn't have made sense to blow the trip
>for this.
>
>Perhaps this is how we absorb some of the life-pain of people who have
>to spend their lives welding flanges on the ends of odd-looking bent
>tubes times infinity.
>
>Yours,
>David