Ah, looks like�an AVX10 compared to�an AVX(space)10.� There's your millimeter. 
�
Just kidding.� I would not think 1mm would make that big a difference on a belt. but I've been belt lucky so far.
�
Stephen
 

________________________________
 From: Mark McCulley <markmcculley@GMAIL.COM>
To: vanagon@GERRY.VANAGON.COM 
Sent: Wednesday, August 14, 2013 10:46 AM
Subject: German quality?
  

I recently purchased a new PS pump belt, size 10x1075 and it's almost 11mm
wide. Check out the photo below comparing two belts, both ContiTech, both
the same part number but the new one on the bottom is almost 1mm wider than
the older one (measured with a micrometer). If you look closely by my thumb
you can see where the edge is starting to fray due to the incorrect fit.

http://i.imgur.com/utXtKpK.jpg

-Mark
87 Syncro Westy