

| Subject: | Re: Filling water tank when no hose is available (GoWesty connector) |
| From: | Dave Mcneely |
| Date: | Sat, 17 Aug 2013 11:28:05 -0500 |
---- Robert Stevens <mtbiker62@GMAIL.COM> wrote: > > In fact, that is how I fill the tank whether with a hose or a jug. I have a five gallon jug with a spigot. I can rest it on the lip of the cabinet above the tank, open the spigot, and drain the water into the tank. If using a hose, I have a valve that fits on the end of the hose, so I can control the flow. Much better than trying to fill through the outside port. That is very slow. > > I don't know what it is you're doing when trying to fill from the outside, but apparently very different from what I'm doing. > The GoWesty filler nozzle, inserted into the filler tube, will fill the tank (13 gallons) in about 5-6 minutes. > > I carry a hose with me so I can always find a place to fill up when I'm out traveling/camping, and I'm often out for > 3-4 weeks at a time. I sometimes fill from the inside using the hose, but that is no faster than from outside. I have one of those "filler nozzles," mine bought from an RV supply store. I would like someone to show me or otherwise instruct me on how to fill the tank via the outside filler in a reasonable amount of time. For me, the water flows into the tank very slowly, backs up, and so on. The result is the same no matter how deeply I insert the tube of the nozzle into the opening. I have examined the hose and all fittings. I replaced the hose with new, same size. Takes forever. I can find no point at which there is any blockage. I bought a new filler from GoWesty when I got the van four years ago, because the old one was cracked. mcneely > > bob -- David McNeely
Have something to add on this topic today? Revive this thread in the forum »