1.  no need to remove the table

2.  No screws holding cabinet floor, it just pulls up for convenience.

3. Who's fault is it your cupboard is full of stuff?

4.  Why do you need to find a screwdriver?  I know right where all if my tools are ( Phillips screwdriver does many things on your van).

5.  Why are you such a slob making a mess everywhere?

It's not a big deal.....

Mike B.

Sent from my iPhone

On Aug 16, 2013, at 14:37, Mike Riley <mkriley@FUSE.NET> wrote:

> kind of defeating the purpose of having a outside fill, eh?
> lets see
> 1 remove table
> 2 remove crap from cuboard
> 3 find scewdriver
> 4 unscrew panel
> 5 unscrew lid
> 6 slop water everywhere tring to pour it in
> 7 do 1 to 5 in reverse order
> 
> much better 
> thanks
> 
> 
> mike
> 
> 
> ----- Original Message -----
> From: Stuart MacMillan <stuartmacm@gmail.com>
> To: mkriley@FUSE.NET, vanagon@gerry.vanagon.com
> Sent: Fri, 16 Aug 2013 11:56:26 -0400 (EDT)
> Subject: Filling water tank when no hose is available (GoWesty connector)
> 
> Fill it from the inside. Just remove the cover over the tank and unscrew the
> 6” lid.  I use a my 2 ½ gallon folding water jug.  Much easier than using
> the funnel I used to carry with the stock hook up.  Use a little silicone
> sealer on the gaskets.
> 
> 
> 
> On Fri, Aug 16, 2013 at 7:56 AM, Mike Riley <mkriley@fuse.net> wrote:
> 
>> Speaking of the GoWesty utility inlets they had some good ideas but missed
> the boat!
> 
>> How are you supposed to fill the tank when there is no pressure water
> available?
> 
>> More seriously they are using the same 2 cent foam gaskets that do all the
> driver’s side seam damage! I was thinking of gearing up to make these in
> silicon rubber of there is any interest.
> 
>> mike
> 
> 
> 
> Stuart
> 
> ’85 Westy with the Go Westy hook ups.
> 
> 
> -- 
> He that would make his own liberty secure, must guard even his enemy 
> from oppression; for if he violates this duty, he establishes a 
> precedent that will reach to himself.
> Thomas Paine