

| Subject: | Re: Fuel filler tube grommet |
| From: | Scott Daniel |
| Date: | Mon, 26 Aug 2013 21:06:10 -0700 |
I have re-used filler neck grommets and they've been fine. It's really good neoprene , seems to me. get the tank down to 1/4 or less.. jack up the right side of the van to make the level in the tankon the right side lower yet. On 8/26/2013 8:06 PM, Ed Duntz wrote: > I just today removed the passenger side expansion tank of my parts van > and > it was not necessary to remove the fuel tank filler. > > Ed > > -------------------------------------------------- > From: "Robert Clemmer" <n51219@COMCAST.NET> > Sent: Monday, August 26, 2013 10:49 PM > To: <vanagon@GERRY.VANAGON.COM> > Subject: Fuel filler tube grommet > >> I'm in the process of replacing the grommets for the check valves in the >> expansion tanks. It appears to be necessary to remove the fuel tank >> filler >> tube to gain access to the right side expansion tank. Question is, if I >> disturb the filler tube, is it likely to leak at the tank grommet when I >> put >> it back together? Also, how low do I need to get the fuel in the >> tank to >> safely remove the filler tube? >> >> >> >> Bob C >> >> Perkasie, PA >> >> 91 2.1 Auto WBX >> >
Have something to add on this topic today? Revive this thread in the forum »