Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Fuel filler tube grommet
From:OlRivrRat
Date:Tue, 27 Aug 2013 09:47:17 -0600

I also did that job, a few months ago on my 90Westy2wd without
needing to remove the FillerNeck

                                                                                        ORR ~ DeanB

On 26 Aug , 2013, at 9:06 PM, Ed Duntz wrote:

> I just today removed the passenger side expansion tank of my parts
> van and
> it was not necessary to remove the fuel tank filler.
>
> Ed
>
> --------------------------------------------------
> From: "Robert Clemmer" <n51219@COMCAST.NET>
> Sent: Monday, August 26, 2013 10:49 PM
> To: <vanagon@GERRY.VANAGON.COM>
> Subject:      Fuel filler tube grommet
>
>> I'm in the process of replacing the grommets for the check valves
>> in the
>> expansion tanks.  It appears to be necessary to remove the fuel tank
>> filler
>> tube to gain access to the right side expansion tank.  Question is,
>> if I
>> disturb the filler tube, is it likely to leak at the tank grommet
>> when I
>> put
>> it back together?  Also, how low do I need to get the fuel in the
>> tank to
>> safely remove the filler tube?
>>
>>
>>
>> Bob C
>>
>> Perkasie, PA
>>
>> 91 2.1 Auto WBX
>>