Torque converter or flex plate will vibrate when the van is stationary.  Rev
the motor in the driveway and check.
Brakes- did you replace the drums or just the shoes?
Did you rotate tires from front to rear?  Did you notice any difference at
all?  If you have access, I think the easiest thing to try next is different
wheels.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Finn Runyon
Sent: Monday, September 09, 2013 9:22 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Driveline vibration 87 automatic

To continue this thread, I have replaced everything that is obvious,
bearings, cv's,tire rotation/balance, brakes, motor mounts.  As previously
stated the vibration/harmonic evens out a bit @60mph, but at that speed the
increased general noise may cover it.  At slower speeds, a hard right turn
makes it go away.  I am wondering if a weak transmission mount (I believe it
is original) would cause something like this.  The next thought that I don't
want to consider at the moment is the torque converter or the flex plate?
Again any advice about where next to look would be great!  Thanks in
advance...
Finn
Taos, NM
87 Westy Pooh
89 Westy Roo