Thank you , Stuart.  Got some at local AutoZone and just put i t on both
RF window gaskets.

John

On Thu, 2013-09-19 at 16:36 -0700, Stuart MacMillan wrote:

> I like the 3M Black Weather Strip Adhesive available from several suppliers.  The lower scrapers are supposed to be held by clips but I found mine needed a dab of this stuff as well.
>
> Stuart
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of John Lauterbach
> Sent: Thursday, September 19, 2013 2:24 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Loose weatherstripping RF door window
>
> When I had my '84 Vanagon repainted in 2004, I also had all the weatherstripping replaced.  Everything was fine until about a year ago, when the weather stripping (channel) that goes on top of the window started falling done each time the window was lowered.  Solution was not to lower the window.  Now the weatherstripping  that goes along the bottom edge of the window on the outside wants to pop up.
>
> What is best way to secure this weatherstripping.  Should an adhesive be used.  If so, which one.
>
> Thank you,
>
> John
> --

-