Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Why would a brand new sway bar drop link break?
From:Ken Wilford
Date:Mon, 30 Sep 2013 14:06:25 -0400

I just finished rebuilding the entire front end of an 85 Westy including
all brand new bushings, ball joints, tie rod ends, rack, shocks, and
springs (Go Westy).  The customer had a new drop link that he supplied
for the front sway bar since one side had snapped. I installed it with
all new bushings on both sides for the sway bar.  About 4 months later
the customer is saying that the brand new drop link is broken.  I can
see this happening with a worn out front end, but why would this happen
with all brand new, rebuilt front end.  A front end alignment was also
done at the time of all of the other work.  The van has brand new tires
and 15" Go Westy rims installed.  Any ideas?  I don't mind replacing the
parts for the customer or doing the repair over once because of a
defective drop link, but I would hate for this to have some obvious
cause that I am missing.

--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com
Phone: 856-327-4936
Fax: 856-327-2242

Have something to add on this topic today? Revive this thread in the forum »