Jim is right about the sunvisors, the inner ends of the visors will bind
against the inner edge of the body above the windshield when they are
flipped because they are now too long (having removed the overhead plastic
housing on mine). Also, depending on the configuration, you may have to
relocate / remove the air-conditioning control switches and patch the holes
in the headliner where the housing and tunnel attachment screws went
through. On my Carat, the electrical controls were located to the right of
the radio, so I didn't have to deal with that.

Dave

On Wed, Oct 2, 2013 at 9:17 AM, Jim Felder <jim.felder@gmail.com> wrote:

> Ben,
>
> If I recall, the sunvisors on that model can't be mounted without the AC
> housing up there. You might check that out.
>
> Jim
>
>
> On Wed, Oct 2, 2013 at 12:03 AM, Ben <syncro@gmail.com> wrote:
>
> > Hi all,
> >
> > I'm just curious and probably asking the obvious. The CH camper I am
> > parting out has the late model Vanagon AC ductwork cut and plugged at the
> > opening of the poptop. But the front piece with the sunvisors is there
> too.
> > Is it just left on for cosmetic reasons? Or is this thing supposed to
> have
> > some other function. IIRC, the fans are only in the evaporator to the
> rear
> > of the van. Short of yanking this piece off, does anyone know if CH might
> > have installed some thing like an auxiliary fan inside that panel? Seems
> > like a total waste, if it was only left for the look.
> >
> >
> > TiA,
> >
> > BenT
> > sent from my electronic leash
>