Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Propex Install
From:Loren Busch
Date:Wed, 30 Oct 2013 16:12:14 -0700

RE: Propex Install
THE EXHAUST MUST BE TO THE OUTSIDE!! And so should the intake for the
combustion.  The large outlet pipe (where the heat comes out) can be
anywhere the Propex is and the box of the Propex should have free air
flowing to it to be heated.  And the intake for the combustion is usually
taken from the outside also.  If you were to place the exhaust inside you
would die!
BTW, you might look at the idea of mounting the Propex in the bottom of the
small cupboard at the floor next to the rear seat.  Or go to the right side
under the rear seat.