I had similar problems on a Ford pickup that I was fixing for a friend.

Several days of aggravation and quarts of fluid later and I realized I had
put the calipers on the wrong sides of the front. Meaning that the bleeders
were lower than the top of the calipers, allowing air to stay in the top of
that piece.

I don't know if you replaced those or not, but that ruined a day or two for
me.

Dave
Professional amateur
On Oct 30, 2013 8:43 PM, "Neil N" <musomuso@gmail.com> wrote:

> Shoe adjustment or shoe hardware assembly error?
>
>
>
>
> On Wed, Oct 30, 2013 at 3:44 PM, Jim Felder <jim.felder@gmail.com> wrote:
>
> > .....
> >
> > Ran another quart through, the pedal goes to the floor.
> >
> > I am using a pressure bleeder to force the fluid through. I've done this
> a
> > hundred times, many on a Vanagon, with no problem. What am I doing wrong?
> >
> > Jim
> >
>
>
>
> --
> Neil n
>
> Blog: tubaneil.blogspot.ca
>
> '88 Westy http://tinyurl.com/c8rlw6p
>
> '81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/
>
> Vanagon VAG *Gas* inline-VR Engine Swap Group:
>
> http://tinyurl.com/d7gd5ej
>