If one didn't have the proper welding gear but did have a proper sized
tap, would tapping suffice?

Neil.

On 11/9/13, Dennis Haynes <d23haynes57@hotmail.com> wrote:

> The links can be repaired by cutting the end flush and welding on a socket
> head cap screw of the correct length. Properly done it may be better than
> new.
>
> Dennis
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Scott Greiner
> Sent: Saturday, November 09, 2013 5:45 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Stabilizer bar assembly needed.
>
> I found a broken stabilizer link when changing the coil springs.

--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG *Gas* inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej