Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: High beams not working-lighting upgrades!
From:mark drillock
Date:Thu, 21 Nov 2013 09:20:23 -0800

Actually, on Vanagons very little of the power needed for running the
engine runs through the ignition switch. Most of the power needed for
the engine while it is running comes from the alternator right to the
fuel injection system wiring and with no fuses involved.

In Vanagons the ignition switch powers on the ignition coil. It also
turns on the power relays in the engine compartment. The exact details
varied over the years.

Mark

JRodgers wrote:
>
>
> A little aside - on the vanagons - and all other vehicles so far as I
> know - pretty near all power goes through the ignition switch. If the
> switch fails - the ignition is lost, everything is lost, can't start the
> car/van............