My parts guy sold me a 1.9 WBX hall. This is all they had access to
and they said I'd have to adapt it to the 2.1 distributor. I don't
recall the details as to why I didn't pursue it further but.....

FWIW, if you need to knock out the pin at distributor base, I found
this worked fine. Image:

https://lh6.googleusercontent.com/-dPeJH9hqNoQ/UAN-nCE2z7I/AAAAAAAAF54/BX8mqO7bzY4/s640/Distributor%2520Pin%2520Removal%2520Tip.jpg

I annealed 3/4" copper pipe, put it on open vise, pounded it half
round with of a 1/2" ratchet extension. Drilled a hole slightly bigger
than the pin. Supporting body with piece of wood, pounded out pin.

Neil.

On 11/28/13, JRodgers <jrodgers113@gmail.com> wrote:
> I will be dealing with a hall sender issue shortly - and after someone
> mentioned putting a Volvo hall sender in their WBX - it made me wonder
> how many hall senders - and from what vehicles - might fit into the WBX
> distributor. Sure would help us all when we are parts scavenging to keep
> our beasts on the road.
>
> Anyone?
>
> John
>

--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG *Gas* inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej