Then you're going to be fabricating. I suspect that the local NAPA would
have ducting that you could make work.

Jim

-----Original Message-----
From: Jim Felder
Sent: Thursday, December 05, 2013 1:19 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: [VANAGON] What Vanagon years will this heater distribution box
fit?

What if you don't have the elbow?

Thanks,

Jim

On Thu, Dec 5, 2013 at 3:10 PM, Jim Arnott <jrasite@eoni.com> wrote:

> If you have the hard plastic pieces that hook to the dash vent outlets on
> the heater (6b & 6c here: <http://www.vagcat.com/epc/
> cat/vw/T2/1991/78/56/887035/>, it's a piece of cake. I just did this
> changeover on my '84.  Bolts right in.
>
>
> Jim