

| Subject: | Re: Loss of head lights, wipers and rear heater blower |
| From: | Jack R |
| Date: | Thu, 26 Dec 2013 10:34:59 -0500 |
I had success with my stalk switches, which started acting up after blast media found its way into the van when I restored it. I ended up hitting the switches with compressed air, then spraying electric contact cleaner into the switches, then lots of compressed air again. Problems solved, very little disassembly. Link to the contact cleaner I used... which has many other applications too. Just don't spray this flammable stuff on any open areas that may spark. Make sure power is off. Use compressed air to dry before power up. http://www.walmart.com/ip/CNC-QD-Electronic-Cleaner-11-oz/16817418 Good luck, Jack -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jim Felder Sent: Wednesday, December 25, 2013 11:09 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: Loss of head lights, wipers and rear heater blower When this happened to me, a new set of stalk switches solved the problem. Unless you need one with cruise control, good ones are (were. You never know these days) cheap and easy to find and replace. Jim > On Dec 25, 2013, at 9:43 AM, JRodgers <jrodgers113@GMAIL.COM> wrote: > > You may have one issue. You may have two issues. > > Issue #1: it's probably your ignition switch. A replacement will > probably take care of all the problems. A relatively easy fix. > > Issue #2: Broken, damaged, or worn out horn ring in the steering wheel. > Also a relatively easy fix. Just be sure when the new horn ring is > installed that a small amount of dielectric grease is applied where > contact finger on the ring slides. > > Good Luck, > > John > > > >> On 12/25/2013 4:13 AM, Bob Anderson wrote: >> Hello All, >> I need some help! I'm trying to figure out why, all of a sudden while driving along, my headlights go out, my wipers stop (it was raining) and my rear heater blower stops. I pulled over and tried the high beams and they came on, as did the wipers and blower. As long as I hold onto the high beam turn signal switch, then everything works, when I let go everything shuts off. Also, sometimes the horn will toot when turning the steering wheel. Has anyone experienced this before? >> Thanks and Merry Christmas and Happy Holidays, Bob A >> '86 GL Massachusetts >> . >>
Have something to add on this topic today? Revive this thread in the forum »