JR

        Assuming this pertains to your 88GL2.1L ~ You Push or SqueezeDown (if
you have it ConvenientlyOriented) on the WireClip & then if it
TheConnector does not want to come off easily you will probably need
to push a ScrewDriverBlade between TheConnector & TheSensor & then
give the ScrewDriver a GentleTwist ~ To remove the Sensor you Pull the
RetainingClip completely out & then Pull the Sensor out ~ Coolant Will/
Should Flow ~

                                                                                                        ORR ~ DeanB

On 29 Dec , 2013, at 11:38 AM, JRodgers wrote:

> I need to release the Temp II sensor.
>
> Question: Does one push the release clip - or pull the release clip
> - to
> unlock and free the connector.
>
> Having a problem getting it loose and it's hard to see the action from
> on top.
>
> Getting underneath to look isn't an option for the time being. It's
> been
> raining and water is running under the van.
>
> Thanks,
>
> John