Though a roller would be best, making a bead on a pipe isn't tough. I
did this for the junction pipe on my Jetta swap.  Image:

https://lh5.googleusercontent.com/-2K7Ubsi32-I/UsxHmOH8VFI/AAAAAAAAIuk/Fch06cr1ec8/s720/Shortened%2520coolant%2520pipe.jpg

Did this earlier on in my < coughs >, fabricating "career" so this
aspect is not really rocket surgery.

Neil.

On 1/6/14, Alistair Bell <albell@shaw.ca> wrote:

>  Then you need to roll some beads on the tubes.

--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG *Gas* inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej