Keith,

When you replace the condenser, hoses and fittings can you reuse the
existing compressor or does it also need to be replaced?

Thanks for the tip on where to locate the parts and pieces to upgrade or
repair the ac system.

Thanks.

Sincerely,

Kevin P. Gilleran

LEED AP, CalCERTS, GPR, CEA, BPI, CEM, QCxP

Gilleran Energy Management, Inc.

750A Davis Street

Santa Rosa CA 95401

Office: 707-528-7318 EXT 200

Fax: 707-528-7325

Cell: 707-843-1606

 <mailto:Kevin@GilleranEnergy.com> Kevin@GilleranEnergy.com

 <http://www.gilleranenergy.com/> www.gilleranenergy.com

Gilleran Energy Management, Inc. has incorporated as of 01/01/2013.

Disclosure:  The author of this e-mail is not a licensed professional
engineer and does not furnish design services.  Any engineering information
or advice contained within this e-mail is the opinion of the author only
based on the information available to him/her at the time, which may not be
complete.  Any engineering information or advice contained within this
e-mail is not intended to and cannot be used by anyone as a substitute for
the independent professional judgment or due diligence of the design
professionals (including, without limitation, the engineer of record)
involved in the project.

Please note: The information in this E-mail message, and any information
transmitted with it, is confidential and may be legally privileged. It is
intended only for the use of the individual(s) named above. If you are the
intended recipient, be aware that your use of any confidential or personal
information may be restricted by state and federal privacy laws. If you, the
reader of this message, are not the intended recipient, you are hereby
notified that you should not further copy, disseminate, distribute, read or
forward this E-mail message. If you have received this E-mail message in
error, please notify the sender by replying to this E-mail message and
deleting the material from any computer.