Look here. Bookmark it. You will be coming back. Lots of good stuff.

http://www.oldvolkshome.com

No problem is too small or too trivial if we can really do something about it.
-- Richard Feynman

On Feb 2, 2014, at 7:04 AM, George Laubach <skiplaubach@comcast.net> wrote:

> I would like to add a tach (like Don, except without the pre-work/time/frustration of dealing with the foil) to my '84/Digijet. Is there a write-up for the "30 minute install"?  AKA, where do the wires go?
> 
> Thanks,
> Skip
> Illinois
> 
> 
> 
> Sent from my iPad
> 
> On Feb 2, 2014, at 8:46 AM, Don Hanson <dhanson928@GMAIL.COM> wrote:
> 
>> I tried the "move the pins, etc" to put a Vanagon tach into my 84, with
>> lots of frustrating and relatively expensive failures. I spent a lot of
>> time removing and re-removing the clusters and foils trying to resolve oil
>> pressure warning system anomalies and dealing with those minute
>> connectors.   I finally decided a small modern aftermarket tach, which I
>> mounted dead-center on the cluster in about 30 minutes.  I spent about $20
>> on that and it's giving good readings, though it IS just a bit too bright
>> with it's LED backlights.