I would suspect that that would depend on the Style & Width of the wheel ~ The E'V'15" Steelys that I have are 15x6 ET44 & I do have 

1/2In Spacers on the Front & 3/4In Spacers on the Rear but I was thinking I had done that so as to MakeRoom for the LargeTires that I run

( 225/60r15 Front & 235/75r15 Rear) & the BigBrakes I have on the Front ~ But I mounted those Wheels almost 6yrs ago so I don't remember

if the Spacers were needed for a WheelClearance issue ~

                                                                                        ORR ~ DeanB

On 18 Feb , 2014, at 6:35 AM, Stephen Grisanti wrote:

> The EV wheels may also require spacers.  I think the EV ET measurement is about 50 versus the Vanagon  ET of 30 or so, suggesting the need for 20mm spacers to position the wheel properly.
> 
> Stephen
> 
> 
> On Tuesday, February 18, 2014 1:05 AM, OlRivrRat <OlRivrRat@COMCAST.NET> wrote:
>         The BoltPattern is the same but the CenterHolt may need to be BoredOut ~ I have E'V'15" Steelys on my 90Westy
> 
> & they needed to be Bored ~
> 
>                                                                                         ORR ~ DeanB
> 
> 
> On 17 Feb , 2014, at 6:32 PM, Ralph Meyermann wrote:
> 
> > Hi, me again! Got a question, will eurovan wheels fit my westy? Been busy
> > wheel shopping and trying to find something a little more flashy than
> > straight vanagon alloys.
> > Velma 82 1.9L AAZ td westy
> 
>