I used a 1/16th drill bit on the plastic, but my screws were too long and
hit the sheet metal behind. I had to swap the 5/8 inch screws for a 3/8
inch and everything went together well. It is not as tight as the stock
screen on a Westy due to the offset plastic, but I think it will do just
fine.

http://s23.photobucket.com/user/dart330/media/Volkswagens/1990%20Vanagon%20Carat/FB4BD4A1-F7F3-4DA4-B9B4-D8EF0745857E.jpg.html

On Sun, Mar 23, 2014 at 12:58 PM, <JordanVw@aol.com> wrote:

>   In a message dated 3/23/2014 1:51:19 P.M. Eastern Daylight Time,
> dart330@GMAIL.COM writes:
>
> It seems like I could install the snaps into the plastic
>
>  just drill into the plastic.
>