Didn't run all the way to the floor of my 82 westy. There were separate floor panels under the galley and under the rear bench. The edge of the floor proper just eased under the rear bench and the galley a tad. You can pull the floor out without moving anything else if it is set up as described.

Alistair

> On Apr 10, 2014, at 9:16 AM, Ben <syncro@GMAIL.COM> wrote:
> 
> Finn,
> 
> IIRC, the wood goes all the way to the wall. I suggest you remove the galley and seats to be able to lift the wood floor.
> 
> It's a good time to check for corrosion at the floor line below the galley.
> 
> 
> BenT
> sent from my electronic leash
> 
>> On Apr 10, 2014, at 7:59 AM, Finn Runyon <finnrunyon@GMAIL.COM> wrote:
>> 
>> I am finally wanting to install the rear facing jump seat I have been lugging around for over 10 years.  I have everything including the OEM brackets that the jump seat pegs sit into on the floor.  My question, even though I have had the rear seat out, I don’t remember how far the floor goes under the seat and the refrigerator/stove cabinet.  Is it possible to unscrew and lift the floor out so that I can weld the brackets to the floor without removing the seat and all that cabinetry?
>> 
>> Thanks,
>> Finn in Taos headed to Arches and Canyonlands this weekend!
>> 87 Westy Pooh
>> 89 Westy Roo