I have to ask the opinion of the list about this weirdness that I have been
experiencing concerning my cooling system mainly the radiator fan switch.

I have always known that the weakest part of the performance of my vanagon
has been its cooling system. I have been looking at things and as I check
around I notice a particularly strange thing.

I have heard in several occasions my radiator fan running, but never when
the vanagon is actually running/moving, only when its off. Now that is a
problem because I have seen my temp needle climb very high past 3/4 of the
way almost all the way to the top. Im able to keep the needle lower, by
placing the van of the clutch and maintaining a higher rev, making the
coolant move around. That is for the birds because I know something is wrong

I pulled the lower grill and with the ignition on I jumped the wires to the
temp sensor that connect to the switch at the radiator. I can jump them in
any combination and the radiator fan runs through the settings

Can a radiator fan switch work only when it wants to? I never hear it come
on while the van is moving or when the needles is obviously telling me its
hot. Why would it only come on sporadically when the van is parked after a
drive? (and that is seldom that I hear it). I have made SURE that the wires
are connected snug and correctly on the switch

The vanagon in question is a 1.9 ltr 85 tintop.

Should I be looking at more than the radiator fan switch?

Thanks,
T.