Maybe the clevis pin is worn out on the pedal, in which case you will never
get a full stroke. GoWesty is selling a replacement now that is cheaper
than a machine shop fix.

You sure you bled all the air out? That can be real tricky with microscopic
bubbles in the fluid.

-- Gnarlie

On Wed, May 14, 2014 at 5:30 PM, thewestyman <zolo@foxinternet.net> wrote:

> Hi to the List,
>
> The clutch only can go halfway and I can't find out why.  It does not
> disengage yet.
> Adjusted the master down as much as it goes.  Put new master, new slave,
> blown the hydraulic line out.  Took the transmission out to see if there is
> anything in the clutch area, but found nothing wrong.
> Am I missing something?
> Zoltan
>