what can happen is the white plastic balls at the base of the shifter wear..
allowing the shift lever to sit lower then it originally did ..
which negates the reverse lock-out feature .

One simple fix is to have a spacer plate cut ...one that raises the
shifter back up by an eighth of an inch or so.

it's not rebuilding the base of the shifter area properly ....but it
works nicely.

Scott

On 5/9/2014 11:30 AM, thewestyman wrote:
> Hi to all,
>
> I have this transmission stick shifter that when I pull it to the 1-2 position, often easily jumps over to face the reverse position.  I guess, there is something that supposed  to stop it there but it’s not resisting enough and lets it to go to the left too much where reverse is.
> Question; can this be fixed without taking the tranny apart or it’s and ‘inside job’.  And what would it be called if I want to find it in the book.
>
> Thanks God for the List,
> Zoltan
>