Thanks All.  I kinda figured that was the case, but it's always nice to hear other opinions from some other (fairly to really) knowledgeable volks.

Dave B,

On 05/23/14, Tom Hargrave wrote:

There is no harm - one of the requirements for ASE certification is whatever oil you put in the car must be able to mix & blend with any other ASE certified oil. This includes mixing Dino & synthetic oils.

Thanks, Tom Hargrave
www.kegkits.com
www.stir-plate.com
www.towercooler.com
www.grow-sun.com
www.raspberryproject.com

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of David Bjorkman
Sent: Friday, May 23, 2014 1:00 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Mixing synthetic and regular oil

Hi All;
I noticed I have a slight oil leak, I believe from the oil pan, in my '87 Westy with a Golf Gen. V engine. At a previous time, I had to drain the oil, from inadvertently overfilling the pan and put the oil in mixed containers while on the road. At the time I didn't have anything to mark them with. Now while topping off, I think I may have mixed oil jugs and put dino oil in with the synthetic, which I normally use. Here's my 2 questions. 1) can one tell the difference, from visual inspection and feel, between synthetic and dino oil? And 2) is it OK to mix the two until the next oil change?

Dave B.