By putting my hand up and into the door cavity, I could feel what I think
is some sort of stubby thing that seems like it is preventing the window
from rotating more than 90 degrees, but really hard to tell. I did a search
on the archives and looked on YouTube, but didn't see anything about
modifying or adjusting this window in the later model vans. Does anyone
know of more information about this? I took the van to the shop for
something else, so I'll have to look more when I get it back at the end of
the week.

Cheers?

Gregg

On Mon, Jun 9, 2014 at 1:45 PM, Jeff Schwaia <vw.doka@gmail.com> wrote:

> There is a hard-to-access phillips screw that controls the tension for the
> vent window.  I've had good luck tightening them with a pair of needle nose
> vice grip pliers.
>
> Cheers,
>
> Jeff
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Gnarlodious
> Sent: Monday, June 09, 2014 10:28 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Triangle vent window question
>
> My window opens all the way ('83) and I get a good breeze in my face except
> I have to hold it in position. Is there a friction adjuster to keep it open
> fully while I am driving faster than 30MPH?
>
> -- Gnarlie
>
>
>
> On Mon, Jun 9, 2014 at 11:25 AM, Loren Busch <starwagen@gmail.com> wrote:
>
> > RE: Wing Window '85 vs. '90
> > BTDT, exactly the same situation.  I used the wing window for air flow
> > in my '85, not so on my '90.  There is a solution.  I saw a posting on
> > the fix quite a few years ago but have no idea how to do it now.  The
> > is a tab that can be cut off if you pull the wing window apart.  I've
> > never tried to do it but I'm sure someone will jump into this thread and
> explain it.
> >
>