Hey Dennis,

Thanks for the hint on the alldatadiy.com  this is a good resource....

Appreciate it..

John

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Dennis Haynes
Sent: Monday, June 09, 2014 10:42 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Average Cost

Next to the Bentley an alldatadiy.com subscription is a wonderful resource.
It includes the shop labor rates for most repairs. Brake repairs can involve
multiple options from just shoes to cylinders, hoses, lines, bearing lube
etc. probably at this point will also need cable replacements.

For the boots the "book" gives .7 hour for remove and replace each axle
assembly. Add another .7 hour to replace the joints/boots on one axle.
For the brakes, this is an attempt at copy and paste. The "B" refers to
skill level. Where there are two numbers the lower is the "warranty" rate.

Dennis

Labor Information Skill Level Mfg. Warranty Standard

Brake Shoe

Replace
 B 1.2 1.7

Note

To R&R or Renew Rotor, Add

One Side
 B 0.0 0.4

To Reface Drum, Add

One Side
 B 0.0 0.4

To Reface Rotor, Add

One Side
 B 0.0 0.7

Add the Following Operations After Pads or Shoes Are Removed

Caliper, Renew

One Side
 B 0.0 0.3

Both Sides
 B 0.0 0.5

Caliper, Overhaul

One Side
 B 0.0 0.5

Both Sides
 B 0.0 1.0

Wheel Bearings, Renew

One Side
 B 0.0 0.4

Both Sides
 B 0.0 0.7

Wheel Cylinders, Renew

One Side
 B 0.0 0.3

Both Sides
 B 0.0 0.6

Wheel Cylinders, Overhaul

One Side
 B 0.0 0.4

Both Sides
 B 0.0 0.8

Hydraulic System, Overhaul

Includes: Overhaul Calipers, Wheel Cylinders & Master Cylinder. Flush,
Refill & Bleed Complete System.
 B 0.0 5.5

    Account  |  Vehicle  |  Help  |  Contact  |  AutoZone Community  |  Exit

C 2014 ALLDATA, LLC. All Rights Reserved. Trademarks

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
John Schwartz
Sent: Monday, June 9, 2014 2:52 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Average Cost

What would be an average cost / time in hours from a shop to repack the CV
joints and do the rear brakes.. looking for the labor, not the parts.

Thanks