John -

Check your ETKA again.  Illustration 32-30, just after item 9 in the text,
Part # N0203001, remarks column says 11x3.5 (11mm ID x3.5mm Wall thickness.
 Below that is the cut size for the hose #10 shorten to 390mm in the same
remarks column.  When looking for the hose part numbers, you have to
usually read the last text line before cut lengths of the hose.

I use 12mm Emissions Hose on both my 84s and my 914.  VW N0203741.  I
always keep some spare hose handy for replacement.

Jim Thompson
84 GL 1.9 "Gloria"
84 Westfalia 2.1 "Ole Putt"
72 411 Station Wagon "Pug"
75 914 1.8 "Nancy"
Full Timing From March 1999 To January 2012
oldvolkshome@gmail.com
http://www.oldvolkshome.com
Find me on Facebook:
http://www.facebook.com/people/Jim-Thompson/100000710343835
***********************************

On Mon, Jun 16, 2014 at 12:21 PM, JRodgers <jrodgers113@gmail.com> wrote:

> Anyone know off-hand the ID of the fuel hose that connects the tank to
> the pump, the pump to the filter and the filter to the plastic fuel line?
>
> Worked on my van early this morning while it was cool, and noted that
> the fuel lines look pretty ratty, and are the original from the factory
> - just looking for an opportunity to leak. I;m going to replace the fuel
> filter and figure that whilst I have the thing apart - I may as well
> replace those 25 year old short segments with new. While it is so hot
> during the day - will be over 90 degrees today with high humidity - I
> wanted to go and get the hose, in my son's air conditioned car) and do
> the repair in the morning while cool.
>
> ETKA lists the hose by part number only - and say buy a length of hose
> and cut it to correct length segment. It does not give the ID in the spec.
>
> So if anyone knows for certain the ID - I would appreciate hearing. It
> would save me some hassle in this heat!
>
> Thanks,
>
> John
>