I no longer use the tables (they were always in the way, especially with my early vans where the closet door is blocked), but when I did, I tightened the knob with the table swung out a few inches and moved it back and forth tightening as much as I could and then pushing it back against the wall.  Worked pretty well.

A more sophisticated fix is to glue a piece of rubber on the flange that is pushed against the pole by the screw.  

Stuart

-----Original Message-----

On Sun, Jun 15, 2014 at 4:39 PM, Richard Golen <rgolen@hotmail.com> wrote:

> Hi,
>
> Anyone have a cure for the rear table swinging out while driving? I've 
> tightened the adjustment knob as much as I can, but it still swings 
> out especially when making a turn.
>
> Thanks.
>
> Ric
>
> 87 Westy
>
> Sent from my iPhone