I did this to reduce the movement, sleeved the table leg using PVC with a thin cutting board liner.� Damps the movement nicely while still letting you move it when you want.� We also moved the front table to the rear position and parked the rear table in our garage.� Front table leg now replaced by galvanized pipe-with-flange step for upper bunk access.

https://picasaweb.google.com/bike2vcu/TableMod#5081113999864711298�

Stephen�

On Tuesday, June 17, 2014 12:40 PM, Stuart MacMillan <stuartmacm@GMAIL.COM> wrote:
I no longer use the tables (they were always in the way, especially with my early vans where the closet door is blocked), but when I did, I tightened the knob with the table swung out a few inches and moved it back and forth tightening as much as I could and then pushing it back against the wall.� Worked pretty well.

A more sophisticated fix is to glue a piece of rubber on the flange that is pushed against the pole by the screw.� 

Stuart

-----Original Message-----

On Sun, Jun 15, 2014 at 4:39 PM, Richard Golen <rgolen@hotmail.com> wrote:

> Hi,
>
> Anyone have a cure for the rear table swinging out while driving? I've 
> tightened the adjustment knob as much as I can, but it still swings 
> out especially when making a turn.
>
> Thanks.
>
> Ric
>
> 87 Westy
>
> Sent from my iPhone