On the back of the speedometer a small branch of the blue foil plugs
into the dynamic oil warning circuit board. Unplug that connector, bend
the outer most pin of the group of 4 slightly over toward the end, push
the connector back into place making sure it misses the bent aside pin.

Mark

Zeitgeist wrote:
> My buzzer is going off all the time now, and it's driving me crazy.  I
> don't have time to troubleshoot the wiring harness, and it seems moot since
> I've got an ALH waiting in the wings.  I just need the WBX to hold out for
> another month or so while I remodel my kitchen, which requires plenty of
> hardware errands and such.  I have a functioning oil pressure gauge that I
> watch religiously, so I know the pressures are well within spec.  It was
> going off before I installed the gauge and new switches, so it's either the
> wiring or the control unit.  Is there a way to just unplug the thing
> without negatively impacting other functions?
>
> --
> Casey
>