Thanks sir!  Just to be clear, it's the pin closest to the drivers door,
right?

On Sun, Jun 15, 2014 at 11:48 AM, mark drillock <mdrillock@cox.net> wrote:

> On the back of the speedometer a small branch of the blue foil plugs into
> the dynamic oil warning circuit board. Unplug that connector, bend the
> outer most pin of the group of 4 slightly over toward the end, push the
> connector back into place making sure it misses the bent aside pin.
>
> Mark
>
>
> Zeitgeist wrote:
>
>> My buzzer is going off all the time now, and it's driving me crazy.  I
>> don't have time to troubleshoot the wiring harness, and it seems moot
>> since
>> I've got an ALH waiting in the wings.  I just need the WBX to hold out for
>> another month or so while I remodel my kitchen, which requires plenty of
>> hardware errands and such.  I have a functioning oil pressure gauge that I
>> watch religiously, so I know the pressures are well within spec.  It was
>> going off before I installed the gauge and new switches, so it's either
>> the
>> wiring or the control unit.  Is there a way to just unplug the thing
>> without negatively impacting other functions?
>>
>> --
>> Casey
>>
>>

--
Casey