Jarrett - looks good but to be honest I prefer the long strip of LEDs in a channel  on the edge of the pelmet. You saw what I did, works well enough to remove the stock galley light.

Neil - you should check out lee valleys led strips. I am impressed by the warm white and they now carry anodized channel that accepts diffusers. They also have nice connectors that do away with soldering to the strip. 
But they don't have good controllers for our applications. I recommend the little controller from superbrite led, the controller that looks like a iPod shuffle.

Alistair

> On Jun 25, 2014, at 7:50 PM, Neil N <musomuso@GMAIL.COM> wrote:
> 
> I am constantly using my Dot-It fixture over the stove. Need to
> install real lighting!
> 
> Thanks for the blog post and info.
> 
> Neil.
> 
>> On 6/25/14, Jarrett Kupcinski <kupcinski@gmail.com> wrote:
>> I added a second galley light above the stove and boy does it make a
>> difference. No more popping popcorn in the dark! If you're interested in
>> what it looks like, I added a few brief notes and a picture to the blog. Big
>> thanks to listmember Harold Teer for helping me source the stock Westfalia
>> light.
>> 
>> http://www.kpcnsk.com/?p=598
>> 
>> -Jarrett
>> 89 Bostig'd Westy
> 
> 
> --
> Neil n
> 
> Blog: tubaneil.blogspot.ca
> 
> '88 Westy http://tinyurl.com/c8rlw6p
> 
> '81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/
> 
> Vanagon VAG *Gas* inline-VR Engine Swap Group:
> 
> http://tinyurl.com/d7gd5ej