

| Subject: | Re: 91 Carat w/autotranny - Turn Signal Issue |
| From: | JRodgers |
| Date: | Sun, 29 Jun 2014 22:05:55 -0500 |
Eric, I swapped the wires to the light holder. that worked for me. John On 6/29/2014 9:22 PM, Eric Caron wrote: > I don't know if you resolved this yet but I had the same problem. And, found a fix. > > I changed my left fast blinking bulb with a good one and all worked fine. Nice slow blink. > > Later for no good reason I put in a different new bulb. and though it worked it blinked fast. > > I removed the bulb and though it should go in only one way I turned it so the little nubs went into the opposite channels. After that it works correctly, but the nice slow blinking. > > So try to turn the bulb and place back in. > > Eric Caron > 85 GL Auto > > > On Jun 27, 2014, at 2:48 PM, JRodgers <jrodgers113@GMAIL.COM> wrote: > >> Just replaced fractured and water filled front turn signal fixtures with >> known working good ones from Ol'Red - my 88 GL which is grounded for a >> while. I also replaced the missing turn signal/flasher relay with the >> one out of Ol' Red. A new relay arrived today in the mail. >> >> Once it was all put together - I tested the turn signals. >> >> The right hand signals - front and rear work nicely - >> Click----Click----Click----Click! >> >> The left hand turn signals also work - but not so nicely - >> ClickClickClickClick. >> >> I pulled Ol' Red's relay back out ans stuck in the brand new one - same >> thing, fairly high speed clickclickclickclik. >> >> With either relay - it was the same - but unlike that which occurs with >> a bulb. >> >> Of note - my son's Honda does the same thing with a new relay. One side >> is faster than the other - significantly so. >> >> One other thing - the emergency flasher does not work. When turned on - >> the light in the signal indicator comes on - but the flasher does not >> work flashing the lights. >> >> If anyone has any insights or experience with this phenomenon I would >> appreciate hearing of it and your solution. >> >> Thanks. >> >> John >
Have something to add on this topic today? Revive this thread in the forum »