Hi Eric,

The rubber boot should be for the wiring connector.  If you lie the unit
lens down, there should be 4 clips facing up at you, 2 on each short
side - there are plastic pegs that fit under them.  If you push the pegs
towards the middle of the unit, you can lift the bulb holder part away
from the lens part.

On 7/10/2014 3:57 PM, Eric Caron wrote:
> Hi Volks,
>
>          four screws removed and the large plastic tail light is in my hands.  Now what?  Does this whole thing come apart somehow or is everything really under the rubber boot. I'm waiting for tips as the small missing piece of plastic in the inside corner tells me that even a sighted previous owner had a problem.
>
> so how do I get this thing apart to change a bulb?
>
> Eric Caron
> 85 GL Auto Westfalia
>

toodle pip,
--
        Dug Smith         | Terry Pratchett: It's almost
(mailto:dug@dugbert.com) | impossible to ride a rock and roll
(http://www.dugbert.com) | motorbike and stay on for three verses.