You can also use electrical connection enhancer/protector on all grounds. It will keep oxidation at bay while improving current flow. See local hardware store's electrical section. 

Chris.

Wysłane z iPhone'a

Dnia Sep 5, 2014 o godz. 15:20 Todd Last <rubatoguy@COMCAST.NET> napisał(a):

> Try Detoxit on the cable connector and ground. Also some have reported improvement by adding a extra ground from the AFM to chassis.
> 
> ----- Original Message -----
> 
> From: "Karl Wolz" <wolzphoto@Q.COM>
> To: "List, Vanagon" <vanagon@GERRY.VANAGON.COM>
> Sent: Friday, September 5, 2014 11:49:44 AM
> Subject: Re: Travel Weirdness (warning; tires. ;)
> 
> Check to make sure your ECU is fully plugged in and double check its ground wire for continuity. Use contact grease.
> 
> Karl Wolz
> Sent from my electronic umbilicus
> 
>> On Sep 5, 2014, at 9:59 AM, Neil N <musomuso@GMAIL.COM> wrote:
>> 
>> Is this kind of thing uncommon?