Probably not, but spring clamps are the best because they maintain constant clamping pressure the life of the hose, which will compress over time. Can't over tighten either.  

Add one of these to your toolbox and you are good to go:  http://www.sears.com/craftsman-cable-operated-hose-clamp-pliers/p-00947390000P 

Stuart 

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Neil N
Sent: Monday, September 22, 2014 1:36 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: re-use WBX Coolant Hose Spring Clamps?

Thanks Craig.

I'm somewhat new to the WBX engine. For use in tight spots, does a spring clamp provide the advantage of easier access for removal-install?  (assuming proper tool used).

On 9/22/14, phishman068@gmail.com <phishman068@gmail.com> wrote:

> I always reuse the spring clamps and see them as extremely 
> advantageous over screw clamps for most applications. I use the proper 
> clamps in the proper places and would suggest doing the same and see nothing wrong with it.

--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG *Gas* inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej