Hi all.

Maybe it's just the morbid mechanic in me having a good time posting
gnarly pics but ....
    ;)

While doing the cooling system work, noticed my oil fill pipe was
quite rusty. image:

http://tinyurl.com/p6xjyrc  (I'm beginning to think this bus sat in
tall wet grass for a while!)

I then recalled a poster on thesamba mentioning that his pipe had
failed at the flange allowing the engine to dump a bunch of oil. At
least that was my understanding. NOT saying that failure is common but
some wire brush work, a strip of medium or coarse emery *cloth*
wrapped around the pipe used like a rag buffing up a shoe, cleaned it
up. A small paint brush can fit in to paint it. I used Zero Rust paint
but there's other options.

At the very least, it'll slow the rust down and I imagine it's
something a lot of Vanagon owners can do.

--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG *Gas* inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej