"brain" =  the idle control unit?

It's just a plastic cover. What I found tricky with that part, is
actually getting connector
off. The female terminals are very "grippy"; if I recall, they have an
extra tang that bites into the male terminal.

On my ICU, I noticed that the female terminals tend to get pushed out
when putting the connector back on.

On 10/16/14, Stuart MacMillan <stuartmacm@gmail.com> wrote:

> Thanks David, I've also been told to check the timing again, it could be a
> bad hall sensor.  So, is that cover on the brain easily removed?
>
> -----Original Message-----
> From: David Beierl [mailto:dbeierl@attglobal.net]
> Sent: Thursday, October 16, 2014 3:23 PM
> To: Stuart MacMillan
> Cc: vanagon@gerry.vanagon.com
> Subject: Re: Weird "idle" problem
>
> At 12:44 PM 10/16/2014, Stuart MacMillan wrote:

> Stuart, the idle controller is subject to solder fatigue just like the ECU,

--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>