Wasn't referring to the table post. Was referring to the body part
("pillar") between windows near table. This image:
http://tinyurl.com/mqxjfg4  shows some of this pillar. If I'm not
mistaken, the white plug covering the threaded hole in question, is
partially shown. If that threaded hole is accessible, it's a
relatively easy job to install a bolt and large "fender" washer at
this hole hook a bungee to the bolt shank, then run bungee around
table leg.

Neil.

On 11/24/14, Stan Shapiro <mail@stanshapiro.com> wrote:

> There is no fabric on,  or hole in,  the post on my table.

> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Neil N
> Sent: Monday, November 24, 2014 11:43 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Securing table
>
> My '81 Westy has an OEM threaded hole on the pillar ~ midpoint of the table.

--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>