You could make a paper rubbing to use as a pattern. You could cut some
tacks and use the points in the holes to transfer the hole pattern to the
front of the panel, then drill through before removing and attaching the
attaching screws from the back. You could remove the driver side panel and
use it as a pattern for the passenger side.

BTW, I have a couple of spares of these things that came out of several
vanagons, and one of them is much longer than the stock ones. Anyone know
what model the long one might have been for?

Jim

On Wed, Nov 26, 2014 at 8:16 AM, Tom Buese <tantonbz@gmail.com> wrote:

> So A dumb question-how do you line up the screw holes from the pocket on
> the back side of the door panel?  It appears they need to be very exact-
> vector analysis?
>
> YMMV,
>
> Mr. BZ-want to install used pocket in the doka which came w/ none & no
> holes
>
> On Wed, Nov 26, 2014 at 6:10 AM, William Monk <billmonk@gmail.com> wrote:
>
> > I like the aftermarket one busdepot offers..cheaper as well.
> >
>
>
>
> --
> Tom Buese
>