Brilliant!

In this case I am adding it on the driver's side as my '90 Euro doka never
came w/ one.

Thanks!

Mr. BZ-as a retired architect, I should have been able to figure this out!

On Wed, Nov 26, 2014 at 9:54 AM, Dan N <dn92610@gmail.com> wrote:

> *"how do you line up the screw holes from the pocket on the back side of
> the door panel?"*
>
> - tape a piece of paper on the pocket, draw around it, punch holes on the
> screw holes then take the paper out and tape it on the door panel and drill
> holes - You don't need to take out the whole door panel, just remove  the
> clips on the bottom and left side of the panel (facing it)
>
> or
>
> - take a piece of chalk, carve it till it's small enough to be inserted in
> the screws holes - a piece of chalk for each screw hole. Position the
> pocket with the chalk over the door panel and then you will have chalk mark
> on it, it's where you will drill the holes.
>
> remember to give clearance for the glove box.
>

--
Tom Buese