I got mine off of Amazon.  One exactly like I have is not listed anymore,
but this is similar:

http://www.amazon.com/Electronic-Fuel-Injection-Light-Storage/dp/B009V28MU8/
ref=sr_1_23?s=automotive&ie=UTF8&qid=1417324520&sr=1-23&keywords=noid+light

Do a Google search and you can find one, or a kit.

GregM

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
OlRivrRat
Sent: Saturday, November 29, 2014 11:08 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Won't Start in St. Helena, Napa County

        I'd just like to know Where One can Find&Purchase a

" simple, small, and not expensive " one of these ~

                                        ORR ~ DeanB

On 29 Nov , 2014, at 8:15 PM, Michael Magnani wrote:

> NOID light? How do I make one of these?
> Mike M
>
>
> On Saturday, November 29, 2014 4:17 PM, "SDF ( aka ;jim lahey' - Scott )"
<scottdaniel@TURBOVANS.COM> wrote:
>
>
>
> can't say it enough..
> it is just SO HANDY to have a simple, small, and not expensive
> ...............NOID light.
>
> that way ..in 10 seconds you can find out if the ECU is triggering the
> injectors ..
> which goes a long way toward identifying what is going on. ..whether
> you get flashes while cranking or not.
>
> or in a rare case dim or intermittant flashes ( saw that on a Subaru
> conversion I bought once....in the end it was a matter of battery
> cable sizes. quite odd, but that was it. )
>
>
>
>
>
> On 11/29/2014 1:39 PM, Steve Williams wrote:
>> On 11/29/2014 3:15 PM, Raymond Markett wrote:
>>> Did you check inside the distributor cap for condensation?
>>
>> Thanks for the suggestion.
>>
>> I just did that.  No obvious condensation.  I wiped the inside of the
>> distributor cap with a dry cloth.  No change.
>>