At one point I needed to see if the injectors were getting juice &
did a search. On some off road forum I found the recommendation for a
light bulb, I believe a side marker bulb. It was almost flat & the
two prongs on the bottom were wire that could be bent out and
inserted into the injector plug.
I plugged it in & had someone crank the engine (a remote start is a
huge help, I bought one after this) and I did see the filament glow.
I do not recall the specific bulb number but it's value were the
wires could be bent to fit into the injector plug.

Rob
vwrobb@gmail.com

At  11/30/2014 09:35 AM, OlRivrRat wrote:
>         The Prob' for Me is that I have an ExtremelyDifficult time
> trying to Justify
>
>buying a Whole Set of Somethings that I only need 1 of ~ That takes away the
>
>"Simple" for Me ~ I have a HugeAversion to being Wasteful ~ It's an
>Affliction ~
>
>I know that the Sets are QuiteEasilyAvailable & Cheap ~ BUT ~ DangIt ~
>
>                                                         ORR ~ DeanB
>
>
>On 30 Nov , 2014, at 1:31 AM, SDF ( aka ;jim lahey' - Scott ) wrote:
>
> > you go to a parts store and buy one.
> >
> > if they don't know what one is ..
> > they don't know their parts business.
> > it's a standard diagnostic tool..
> >
> > google it.
> >
> >
> > On 11/29/2014 5:15 PM, Michael Magnani wrote:
> >> NOID light? How do I make one of these?
> >> Mike M
> >>